Laboratory Instruments

Product Details:

Supplied with 250ml Reaction Vessel, Dual Platinum Combined Electrode, Teflon Paddle, Teflon Assembly, Moisture Trap (02 Nos.), 250ml Amber Reservoir Bottle, Dispensing Tube (02 Nos.), Micro tip (02 Nos.) Teflon Tube for Dispensing Path, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Product Details:

Implemented with advanced mosfet technology, Ultrasonic Bath Sonicator is equipped with auto-tuning facility for easy handling. Fulfilling the diverse requirements of the laboratories, these sonicators are widely used in quality units, R&D and analytical labs for cleaning purpose. Equipped with extensively protected electronic circuits, the ultrasonic bath sonicator ensure gentle yet effective cleaning action. It removes the contaminants left from the previous process.

Product Details:

Supplied with 250ml Reaction Vessel, Dual Platinum Combined Electrode, Teflon Paddle, Teflon Assembly, Moisture Trap (02 Nos.), 250ml Amber Reservoir Bottle, Dispensing Tube (02 Nos.), Micro tip (02 Nos.) Teflon Tube for Dispensing Path, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Product Details:

Salient Feature

• Metalic Epoxy Based Powder Coated Body
• Parallel Port to connect 80 column Dot-matrix Printer
• Report Formation as per GLP Compliance
• Built in Magnetic Stirrer with soft touch Key Speed Controller
• Automatic end point detection with Audio Alarm
• OVER TITER Audio Alarm save KF Reagent
• Automatic Calculation of Avg. Factor and Maxi. 10 KF Factor can be stored in memory
• Auto Neutralization reduces the time between analysis & Gives accurate Results
• Onsite Dispenser Calibration/Validation Facility
• MOC of Dispenser is SS/ABS/TEFLON for Corrosion Protection & Maintenance free Operation
• In-Built Flushing System for cleaning dispensing path

Product Details:

Product Details:

Combination Glass pH Electrode with BNC Connector pH Range : 0-14 pH, Temperature Range : 0-70ºC

Product Details:

Supplied with 1000 ml Glass Beaker – 02 Nos., 6 tube basket assembly – 02 Nos., Guided Discs – 12 Nos., Temperature Probe – 02 Nos., Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Additional Information:

• Packaging Details: Supplied with 1000 ml Glass Beaker – 02 Nos., 6 tube basket assembly – 02 Nos., Guided Discs – 12 Nos., Temperature Probe – 02 Nos., Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Product Details:

Supplied with 250ml Reaction Vessel, Dual Platinum Combined Electrode, Teflon Paddle, Teflon Assembly, Moisture Trap (02 Nos.), 250ml Amber Reservoir Bottle, Dispensing Tube (02 Nos.), Micro tip (02 Nos.) Teflon Tube for Dispensing Path, Power Cord, ANALABsafe software, USB Interface Cable, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Additional Information:

• Packaging Details: Supplied with 250ml Reaction Vessel, Dual Platinum Combined Electrode, Teflon Paddle, Teflon Assembly, Moisture Trap (02 Nos.), 250ml Amber Reservoir Bottle, Dispensing Tube (02 Nos.), Micro tip (02 Nos.) Teflon Tube for Dispensing Path, Power Cord, ANALABsafe software, USB Interface Cable, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Product Details:

Supplied with Conductivity Cell K = 1.0, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, ANALABsafe software, USB Interface Cable, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Product Details:

 

To study the packing down of powder beds of different pharmaceutical & chemical powders.

Features:

* Acrylic Measuring Cylinder Holder with Rubber cushioning.

* Maintenance free AC Motor 30 RPM.

* Direct Stroke setting eliminates the tedious calculation of Timer Mode

* Microprocessor based counter with non-contact sensor for trouble free operation.

* In power failure, the non-volatile memory of the microprocessor remember the last mode of operation.

Technical Specifications:

* Capacity: 50ml / 100ml / 250ml 2 Nos Measuring Cylinders.

* Rate: 30 drops / min Fix

* Drop Height: 50mm

* Setting of Drops: Adjustable between 1 to 9999 drops.

* Display: 4 digits, 7 segment Red LED 12mm H.

* Dimension: 350mm W x 265mmD x 280mm H

Note:

 

Adaptors to accommodates 50ml & 100ml cylinder in 250ml Model & 50ml cylinder in 100ml Model

 

Product Details:

The Exhaust Laboratory Fume Hood is synonymous to standard bypass design, exhausting a constant volume of air, irrespective of the sash position. Constructed with an advanced airfoil design, the overall safety and performance of the flame hood are excellent and proficient. The rolled-entry design of the hood ensures zero flow of the eddy currents and reverse flow from the hood. There is an excellent provision for the removal of heavy gases or evaporation from a spill. We offer these exhaust flame hoods in different capacities and specifications. Built with microprocessor controllers, these flame hoods are equipped with easy-access utilities panels for easy maintenance and operation.

Product Details:

Basic Unit consist of Combined Glass Electrode with suitable connector, Rod Stirrer, Titration Vessel holders, Titration Vessels, 20ml Burette, Valve Jet assembly, Teflon Tubing with Connector, Stand, Standard Software (without computer), Communication Cable, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

(Note: Computer must procure optionally to operate the system)
Applications:
Auto Titrator is a highly competitive equipment matching almost all technical specifications. It is a complete titration equipment for potentiometric titration for both aqueous solutions with acid base and non-aqueous solutions such as Perchloric acid and Tetra butyl Ammonium Hydroxide.

Potentiometric titration is most required in any chemical analysis. This type of analysis weighs in highly in pharmaceutical research and industry and is very economical and accurate. Other applications of this type of analysis are multitude but to draw a few examples, here is a list of industrial and research applications Antibiotics such as Norfloxacin, Ciprofloxacin, Ampicillin and Amoxicillin.

Additional Information:

• Delivery Time: 3-4 Weeks