Laboratory Scale Gas Generator

Product Details:

Supplied with 40µ Air Filter with Auto Drain at inlet & 0.01µ Mist Filter at outlet to remove moisture, dust & mist, Inline Particulate Filter, 1/4” Nut (Pack of 10 Nos.), 1/4” Front & Back Ferrule (Pack of 10 Set), Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Product Details:

Supplied with 40µ Air Filter with Auto Drain at inlet & 0.01µ Mist Filter at outlet to remove moisture, dust & mist, Inline Particulate Filter, 1/4” Nut (Pack of 10 Nos.), 1/4” Front & Back Ferrule (Pack of 10 Set), Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Product Details:

Supplied with 40µ Air Filter with Auto Drain at inlet & 0.01µ Mist Filter at outlet to remove moisture, dust & mist, Inline Particulate Filter, 1/4” Nut (Pack of 10 Nos.), 1/4” Front & Back Ferrule (Pack of 10 Set), Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Product Details:

Combination Nitrogen & Zero Air Gas Generator is suitable for gas chromatography. Ensuring ultra high purity grade zero air for combustion gas, this type of generator has a stable and lower baseline signal unlike traditional gas sources. Owing to its lower baseline noise, there is larger signal to noise ratio, enhancing the sensitivity or larger peak areas. The zero air generator is easy to operate, with no labor intensive monitoring involved.


Salient Features

• Zero Air Generator for low investment
• Low Electric power consumption.
• Calibrated needle valve to adjust purge flow.
• No moving parts.
• Hence negligible maintenance.
• Easily installed - just make the air connection plug in the electrical power cord.
• Skid mounted unit need no pounds.
• Pressure capacity : from 4.0 - 7.0 Kg/cm²

Product Details:

Supplied with 40µ Air Filter with Auto Drain at inlet & 0.01µ Mist Filter at outlet to remove moisture, dust & mist, Inline Particulate Filter, 1/4” Nut (Pack of 10 Nos.), 1/4” Front & Back Ferrule (Pack of 10 Set), 1/4” Equal Tee with Nut & Ferrules – 01 No., Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Product Details:

Supplied with 40µ Air Filter with Auto Drain at inlet & 0.01µ Mist Filter at outlet to remove moisture, dust & mist, Inline Particulate Filter, 1/4” Nut (Pack of 10 Nos.), 1/4” Front & Back Ferrule (Pack of 10 Set), Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.