Karl Fischer Titrator
The Karl Fischer Titrator, is ideally used in different industries for determining the quantity of water while manufacturing processes. These instruments are highly appreciated for their features like high accuracy, quick analysis preparation, small sample quantity required, auto drain facility and high durability. The range is idyllically used in chemical and pharmaceutical industrial manufacturing processes.
The Karl Fischer Titrator (Model : µAquaCal10), is
ideally used in different industrial manufacturing processes for determining
the amount of water. To suffice the water amount determining requirements of
our clients, we offer these titrators with dual platinum electrode, moisture
trap for reaction vessel, 250ml amber reservoir bottle, Teflon tubing for
dispensing path, 250ml reaction vessel, Teflon paddle Teflon assembly,
dispensing tube (02 nos) manufacturer test certificate, warranty card and
operational and instruction manual.
Model : µAquaCal10
Supplied with 250ml Reaction Vessel, Dual Platinum
Electrode, Teflon Paddle Teflon Assembly , Moisture Trap for Reaction Vessel
& 250ml Amber Reservoir Bottle, Dispensing Tube (02 Nos) , Teflon Tubing
for Dispensing Path, Operational & Instruction Manual, Manufacturer Test
Certificate and Warranty Card.
- Metalic Epoxy Based Powder Coated Body
- Built in Magnetic Stirrer with soft touch Key Speed Controller
- Rugged Teflon Housing for holding Dual Platinum Electrode &
- Automatic end point detection with Audio Alarm.
- Auto Drain Facility for cleaning reaction vessel (Optional) OVER
TITER Audio Alarm save KF Reagent Onsite Dispenser
- MOC of Dispenser is SS/ABS/TEFLON for Corrosion Protection &
maintenance Free Operation.
- Flushing System for cleaning dispensing path.
|Method of Detection
|Backlit LCD Display
||16 x 2 Line Alphanumeric
|Range of Moisture Detection
||less than 20 PPM to 100%
|Display of Reading in ml with minimum resolution
||Motorized Dispensing for low & accurate measurement of reagent.
||Dual Platinum Electrode
|End Point Time
||1-99 Seconds , Users Adjustable
|End Point Sensitivity of Moisture Detection
||230 VAC ± 10% , 50 Hz
- Auto Drain of Reaction Vessel
|Report Date & Time
|Calibration Date & Time
||Water by Volume
|Average Titer Factor
|Analysis Date & Time
|Sample Type & Method
||Liquid by Volume
|Volume of Sample (ml.))
|Density of Sample
|Stirring Time (Min:Sec)
|End Point Time (Seconds)
|End Point (ml.)