Analab Scientific Instruments Private Limited

Analab Scientific Instruments Private Limited

Send Email

Karl Fischer Titrator

Analab Scientific Instruments Private Limited

Home  » Products  » Karl Fischer Titrator  » Karl Fischer Titrator, Model : µAquaCal50

Karl Fischer Titrator

The Karl Fischer Titrator (Model: µAquaCal50) is idyllically utilized in pharmacies, food processing unit, chemical and petrochemical industries for determining the amount of water during any product manufacturing process. These titrators are made by keeping the requirements of our clients in mind and utilizing topmost quality material and sophisticated technologies. This range of titrator determines the quantity of water precisely with the assistance of conductometric detection method.

Model : µAquaCal50

Supplied with 250ml Reaction Vessel, Dual Platinum Electrode, Teflon Paddle Teflon Assembly , Moisture Trap for Reaction Vessel & 250ml Amber Reservoir Bottle, Dispensing Tube (02 Nos), Teflon Tubing for Dispensing Path, Operational & Instruction Manual, Manufacturer Test Certificate and Warranty Card.

Salient Feature

  • Metalic Epoxy Based Powder Coated Body
  • Parallel Port to connect 80 column Dot-matrix Printer
  • Report Formation as per GLP Compliance
  • Built in Magnetic Stirrer with soft touch Key Speed Controller
  • Automatic end point detection with Audio Alarm
  • OVER TITER Audio Alarm save KF Reagent
  • Automatic Calculation of Avg. Factor and Maxi. 10 KF Factor can be stored in memory
  • Auto Neutralization reduces the time between analysis & Gives accurate Results
  • Onsite Dispenser Calibration/Validation Facility
  • MOC of Dispenser is SS/ABS/TEFLON for Corrosion Protection & Maintenance free Operation
  • In-Built Flushing System for cleaning dispensing path

Technical Specification

Method of Detection Conductometric
Backlit LCD Display 20 x 4 Line Alphanumeric
Range of Moisture Detection less than 20 PPM to 100%
Display of Reading Direct Reading of Moisture in PPM, Percentage(%) & mg/ml of water
Dispenser Motorized Dispensing for low and accurate measurement of reagent.
Electrode Dual Platinum Electrode.
Stirring Time 00:00 to 99:00 ( Minutes : Second )- Users Adjustable
End Point Time 1-99 Seconds , Users Adjustable
End Point Sensitivity of Moisture Detection Users Adjustable
Calibration Reminder Alarm 0-99 hours
Data Storage More than 10 Analysis data with corresponding calibration data.
Interface Parallel Port for Dot-matrix Printer attachment.
Input Electrode Connector
Power supply 230 VAC ±10%, 50 Hz


  • Auto Drain of Reaction Vessel
  • RS-232 to USB Interface with Cable & Driver software to Transfer Data from Inst. to PC
  • GMP model

Analysis Report

Report Date & Time 12-FEB-2010 – 16:09
Calibration Date & Time 11-FEB-2010 – 23.34
Calibration Method Water by Volume
Average Titer Factor 6.666666
Analysis Date & Time 12-FEB-2010 – 16.00
Sample Type & Method Liquid by Volume
Volume of Sample (ml.) 05.000
Density of Sample 0.789
Stirring Time (Min : Sec) 00:00
End Point Time (Seconds) 20
End Point (ml.) 01.41
Moisture % 000.2382
Moisture (PPM) 0002382.0
H2O (mg/ml) 002797.87

Calibration Report

Report Date & Time 03-FEB-2010 – 17
Calibration Date & Time 03-FEB-2010 – 15.22
Calibration Method Water by Volume
Stirring Time (Seconds) 00
Sr. No. Volume(microlitre) End Point(ml.) TF Value
01 10 01.99 5.025125
02 10 01.81 5.524862
03 10 01.81 5.524862
04 -N/A--
05 10 01.81 5.524862
06 10 01.81 5.524862
07 --N/A--
08 --N/A--
09 --N/A--
10 --N/A--
Average Titer Factor     5.524862

Yes! I am Interested

Looking for Product Name ?


Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name